Anaerobic Microorganism Oil Decomposing Bacteria

Product Advantages

5. Reduce the use of chemicals and ecological environmental protection

Use Parameters
The test shows that the following physical and chemical parameters are the most effective for bacterial growth:
*PH value: The range is between 5.5 and 9.5, and it can grow fastest between 7.0 and 8.0.
*Temperature: Effective between 10 ° C ~ 40 ° C. The temperature is higher than 40 ° C, which will cause bacterial death: When the temperature is lower than 10 C, the bacteria will not die, but its cell growth will be greatly limited. The most suitable temperature is 26-32 ° C.
*Solubbing oxygen: The dissolved oxygen of anaerobic tank is below 0.2 mg/L, the dissolved oxygen dissolved oxygen of the hypoxic pool is 0.5-1mg/L, and the solubility of the good oxygen tank is 0.5 mg/L
*Trace elements: The proprietary fungus family will need many elements in their growth, such as potassium, iron, calcium sulfur, magnesium, etc., usually the soil and water sources contain the above sufficient elements.
*Salt: It is applicable in seawater and fresh water, and can tolerate a salinity of up to 10%O.
*Anti -toxicity: It can effectively resist chemical toxic substances, including chloride, oxide and heavy metals
Note: When the pollution area contains bactericides, they should study their effects on microorganisms in advance.

Dosage:
① Usage: According to the activation agent: bacteria powder: water = 1: 10: 100 ratio (ie 100g activator, 1kg bacteria powder, 10L water) is placed in a barrel, stir well after mixing 2h The best is 30 ° C; if the temperature is low, it is necessary to extend the activation time to 3 to 5h);
② Dosage: 1kg bacteria can be used for pool capacity (or 100 ～ 500g/m3 pool capacity) of 2 to 10m3. The specific dosage and frequency of use must be determined according to the sewage type, actual daily water processing, and biochemical pool capacity.