Bio Degrading Bacteria Enzyme for COD

【Scope of application】Urban sewage treatment plants, purification of water quality in aquaculture areas, industrial wastewater such as various and chemical wastewater, printing and dyeing wastewater, food wastewater, etc.

Product Efficacy

1. Remove BOD, COD, SS, TN, improve water transparency, and remove chroma to a certain extent
2. Accelerate sludge settlement in sewage, increase sludge floc particles, and adjust sludge floc structure
3. Selectively screen out strains that can adapt to complex hydraulic conditions, thereby shortening the acclimation time and increasing the film hanging efficiency
4. Inhibit viruses, germs and parasites to a certain extent
5. It can consume a large amount of carbon source and nitrogen source nutrients for the water body with excessive algae reproduction
6. Can effectively purify water and restore water color
7. The production process of local fermentation has strong adaptability to the local environment

Use in aerobic pools:
1. Close the water inlet and outlet of the sewage treatment biochemical section, and pre-aerate for 2 hours, and the dissolved oxygen content is between 2mg/L-4mg/L.
2. The bacteria and sewage are fully stirred in the barrel, and then evenly sprayed or poured into the aeration tank (aerobic tank).
3. After pouring the mixture of bacteria and sewage, start aeration, and start water after 24 hours of continuous aeration. It is recommended to enter 1/3 of the total water volume, 2/3 of the water in the stage, and the third stage according to the detected water. The change of the water quality value can adjust the water intake.
4. The dissolved oxygen value should be controlled between 2mg/L-4mg/L, the pH should be controlled between 7.8-8.5, and the water temperature should be above 10℃.