Welcome: Welcome: Kashion Biotech Group Co., Ltd   
sales@kashionbiotech.com +86 17718148007

Home      Products     Sewage Treatment Bacteria     Electroplating Smelting Wastewater Treatment       Heavy Metal Scavenger for Steel Plant Wa


  • Heavy Metal Scavenger for Steel Plant Wastewater
  • Heavy Metal Scavenger for Steel Plant Wastewater
  • Heavy Metal Scavenger for Steel Plant Wastewater
Heavy Metal Scavenger for Steel Plant WastewaterHeavy Metal Scavenger for Steel Plant WastewaterHeavy Metal Scavenger for Steel Plant Wastewater

Heavy Metal Scavenger for Steel Plant Wastewater

Product Description:

Steel plant wastewater characteristics


Iron and steel plant wastewater is generally industrial wastewater containing volatile phenols, polycyclic aromatic hydrocarbons, and heterocyclic compounds such as oxygen, sulfur, and nitrogen in the process of high-temperature dry distillation, purification and by-product recovery of coking and coal gas.


It is an industrial organic wastewater that is easily accompanied by heavy metals exceeding the standard and is difficult to treat.


Case

1               Basic information of customers

⊙Wastewater properties: coking wastewater

⊙Excessive index: aluminum ion

⊙Excessive concentration: about 2-5PPM

⊙Daily sewage treatment capacity: 600 tons


 2            Client needs

The aluminum ion of the plant needs to be reduced to below 0.5PPM, and the cost needs to be controlled at the same time. In addition, other by-products generated by the reaction of the chemical have little impact on the discharge of the standard.

Agents used on site: PAC, PAM, lime, hydrochloric acid, sodium hydroxide


3            On-site debugging status

According to the feedback from the engineers, the on-site water quality is relatively complicated, and when the coking wastewater is not properly treated, it will exceed the standard.


Since the plant is a new sewage station, it is now in the transition period of construction. The heavy metal scavenger is mainly used for emergency treatment during this period.


4.

Amount of heavy metal scavenger added (Mg/L)

Residual Aluminium Ion (Mg/L)

pH value

0 (raw water)

3.04

8.75

50

2.11

8.73

100

0.24

7.70

Experimental results


The experimental results of the pictures show that when the dosage of aluminum ions is 100PPM (adding 0.1kg of heavy metal scavenger per ton of wastewater), the aluminum ions can be controlled within 0.5mg/L.


5 heavy metal scavenger

The heavy metal scavenger chelates heavy metal ions through a variety of chelating groups to produce a hydrophobic structure for precipitation, and significantly improves the precipitation speed and removal rate through flocculation and net capture, thereby getting rid of the shortcomings of linear chelation precipitation.

Inquiry:
Leave a message

whatsapp

Email

Phone

Top