Aerobic COD Degrading Bacteria Enzyme

Category： Municipal Sewage Treatment
Powder Appearance: Solid Powder
Viable Bacteria Content: N 20 billion/g
PH Value: 5.5-9.5
Temperature: 8℃~60℃
INQUIRY EMAIL

Product Description:

Product Efficacy

1. It can quickly decompose organic matter in water and convert it into non-toxic and harmless carbon dioxide and water, and improve the removal rate of organic pollutants in domestic sewage treatment plants. It can effectively avoid secondary pollution, reduce the amount of sewage, and improve the quality of sewage.

2. It can convert ammonia nitrogen and nitrite in sewage into harmless nitrogen and release it from the water body, reduce the release of odor, inhibit the growth of spoilage bacteria, reduce the production of biogas, ammonia and hydrogen sulfide, and reduce air pollution.

3. It can shorten the acclimation time and film hanging time of activated sludge, and speed up the startup of the sewage treatment system. It can reduce the amount of aeration, improve the utilization rate of oxygen, greatly reduce the air-water ratio, reduce the amount of aeration, and save the cost of electricity consumption in sewage treatment.

Application:

1.Suitable for municipal sewage treatment plants, various chemical wastewater, printing and dyeing wastewater, landfill leachate, food wastewater and other industrial wastewater treatment

2.It is the best choice for sewage treatment projects, landscape water treatment, river and lake ecological restoration

Use in aerobic tank:
1. Close the water inlet and outlet of the sewage treatment biochemical section, and pre-aerate for 2 hours, and the dissolved oxygen content is between 2mg/L-4mg/L.
2. The bacteria and sewage are fully stirred in the barrel, and then evenly sprayed or poured into the aeration tank (aerobic tank).
3. After pouring the mixture of bacteria and sewage, start aeration, and start water after 24 hours of continuous aeration. It is recommended to enter 1/3 of the total water volume, 2/3 of the water in the stage, and the third stage according to the detected water. The change of the water quality value can adjust the water intake.
4. The dissolved oxygen value should be controlled between 2mg/L-4mg/L, the pH should be controlled between 7.8-8.5, and the water temperature should be above 10℃.