Anaerobic Enzyme Denitrifying Sewage Treatment Bacteria

Product Function:

1. Reduction of water: Reduction of nitrite in water to generate nitrogen gas to relieve the harm of nitrite.
2. Purify the water body: consume nitrogen nutrients, inhibit the excessive reproduction of algae, and purify the water body.
3. Inhibit bacteria: inhibit pathogenic bacteria.
4. Optimize geology: Improve geology.

Application:

Denitrifying bacteria are used in industrial wastewater such as municipal domestic wastewater, landscape water treatment, urban inland river treatment, food wastewater, slaughter wastewater, printing and dyeing wastewater, tanning wastewater and garbage permeate. Among them, aquaculture sewage treatment is the most widely used

Instructions
1. Before placing the bacteria, stop the water inlet and outlet of the biochemical system;
2. In the ratio of 100ppm-1000ppm, add bacteria into the anaerobic tank and stir;
3. After the first day of aeration to activate the bacteria, the second day is filled with one third of the water, the third day is two thirds of the water, and the third day is fully opened.

Precautions
1. Depending on the degree of deterioration of the water body, the dosage can be increased.
2. It should not be used at the same time with disinfection and sterilization drugs, and the interval must be more than 3 days.
3. In principle, this product cannot be used at the same time as fertilizer. It is not suitable to use this product within two days after fertilization. It can be used flexibly according to the specific situation.
4. It is a normal phenomenon that the transparency of the water body increases after using this product, just apply appropriate amount of fertilizer.