Microbial Bacteria Agent Paper Factory Textile Printing Dyeing Plant Wastewater Treatment

The bacterial agent is used in papermaking and textile wastewater to reduce the refractory organic matter and improve the COD removal rate

1. PH Value

The average range is 5.5 ~ 9.5, and the fastest growth is between 6.6 ~ 7.8. Practice has proved that the treatment efficiency is the best when the PH value at 7.5.

Shelf Life

Sealed for 2 years and unsealed for 2 months.

Safety

Non toxic and harmless

2. Characteristics of bacterial agent:

·Contains a variety of strains capable of utilizing aerobic, facultative and fermentative metabolic pathways;

·Rapid spore germination and growth;

·Bacteria are able to multiply under a variety of conditions to produce long-term effects.

3. Product features:

·The strains contained in the product can greatly enhance the tolerance of the system when the emission of black liquor in paper making increases substantially;

·Enhance the removal efficiency of refractory organic matter and significantly improve the COD removal rate;

·Improve the stability of the wastewater treatment system and reduce the frequency and severity of system failures

·Strengthen the flocculation of activated sludge and reduce SS in effluent;

·Rapid recovery from failures due to loads and poisons;

·Mitigate the impact of increased yield or changes in product composition on effluent quality;

·Reduce the dosage of chemical agents, reduce the treatment cost, and reduce the additional cost of treatment facility expansion;

·Speed up start-up of new equipment, quarterly start-up or post-maintenance start-up.