Salty Sewage Treatment Bacteria Powder

Category： Salt Tolerant Bacteria
Status ：powder
Packaging：support customization
Sample：support samples
Moq:500g
INQUIRY EMAIL

Product Description:

Product Description

Name	Salty Sewage Treatment Bacteria Powder	Viable bacteria content	N20 billion/g
Main Components	Bacillus, coccus, various enzyme preparations, etc.	State	Solid Powder
PH Value	The average range is 5.5 ~ 9.5, and the fastest growth is between 6.6 ~ 7.8. Practice has proved that the treatment efficiency is the best when the PH value at 7.5.
Use parameters	1. Temperature ; 8-60℃，best 26-32℃ 2. Trace elements: potassium, iron, calcium, sulfur, etc., which are usually contained in water sources 3. Salinity: Applicable in both seawater and freshwater, up to 10% salinity
Application	Treatment of various chemical wastewater, printing and dyeing wastewater, food wastewater, urban sewage, etc.
Storage method	Keep away from light, and store in a ventilated and dry place
Shelf life	Sealed for 2 years
Notice	When contaminants contain biocides, consider their effect on microorganisms

Function

1. Under the condition that the salinity of the sewage reaches 10%, it can quickly domesticate the disease and form a film in the biochemical system

2. It can effectively remove BOD, COD and TSS in wastewater, and ensure that the wastewater with high salinity reaches the effluent standard

3. When the influent load fluctuates greatly, it can effectively enhance the sedimentation performance of the sludge, prevent the sludge from floating, and improve the water quality, reduce the cost.

FAQ

1. Do you have relevant industry success stories?

Yes, our company has been established for many years. Every year, we produce a lot of bacterial agents, which are applied to many industries that produce sewage. There is a 99% success rate. You can learn about related success stories.

2. Why are some bacteria powder on the market cheaper than yours?

Generally speaking, cheap bacteria have low content of effective bacteria, poor types of bacteria, low efficiency and short maintenance time. Our company's products are all high-quality strains, and we absolutely do not produce low-cost and low-quality products on the market.

3. What could be the reasons for the failure?

In practice, the reason for the failure may be:

1)There are many types of bactericidal substances in water.

2)The dosage is significantly lower than our recommended amount

3)Unsuitable growth environment for bacterial agents in sewage treatment systems